Counterinsurgency American style: Considering David Petraeus and twenty-first century irregular war

This article examines the complex legacy of David Petraeus who was a key figure in the emergence of the US military shift towards counterinsurgency doctrine in the years after 2006. Although Petraeus has been perceived by critics as a publicity seeker, he can be credited with laying the foundations for a more serious commitment to COIN involving in particular in integrating conventional and Special Forces in arenas like village stability operations. The article looks a Petraeus's role in both Iraq and Afghanistan: it concludes that, in the case of Afghanistan, it is too early to assess whether counterinsurgency has had a decisive impact of the outcome of the war against the Taliban.     

基于旋量方法的高超声速飞行器三维非线性伪最优制导律设计

针对高超声速飞行器制导过程中的通道耦合问题,设计一种基于旋量方法的三维非线性伪最优制导律。引入角度矢量、视线旋量、视线旋量速度等概念,通过等价性证明,得出视线旋量、视线旋量速度控制分别与视线方位、视线角速度控制具有一致性的结论,从而将制导问题转化为视线旋量和旋量速度的控制问题;基于旋量方法构建弹目视线旋量、视线旋量速度模型,构建得到飞行器制导的三维非线性模型;为避免直接求解Riccati微分方程过程的复杂性,引入伪控制变量,将三维非线性制导模型转化为线性制导模型;分别针对无终端约束和有终端约束情况,基于二次型最优方法得到三维非线性伪最优制导律。该制导律避免了通道解耦,其制导参数又满足一定物理意义下的最优性。仿真结果验证了所设计制导律的有效性。     

考虑弹体动态特性的机动效率约束导引律

针对考虑交会角和过载约束导引律在大机动时能量损失大的问题,提出一种考虑导弹机动效率的多约束制导律。应用最优二次型原理推导出考虑一阶弹体延迟的时变导引系数闭环次优制导形式,将导弹机动时刻阻力系数引入时变权系数,并通过迭代确定机动效率约束边界。将时变约束表示成剩余时间与弹体延迟时间的函数,代入制导指令,进行弹道仿真。结果表明,对于常值与机动目标,文中制导律与过载约束导引律同只考虑交会角约束的导引律相比,对目标均能实现末端弹道成型要求,而考虑机动效率的制导指令分配更为合理,在避免指令加速度饱和的同时有效降低了拦截末端速度损耗,提高制导精度与毁伤效果。且该制导律中时变权系数无须配平求解,在保证精度的同时极大地提高了迭代速度。     

保持连通的边缘细化算法

传统的图像边缘检测算子一般都只能得到多像素宽边缘,这为后续的图像处理带来了一定困难。结合边缘走向趋势的估计技术以及对连通关键点判断的方法,提出了一种新型的边缘细化算法———保持连通的边缘细化算法。该算法能在保持边缘原有信息(连通和走向)的前提下,以较小的计算开销,给出理想的或是可接受的单像素宽细化结果。     

两种数字水印算法的比较

分别介绍迭加水印方案和量化水印方案,对每种方案一些常见算法予以说明,阐明其优缺点,对两种水印方案的相同点和不同点进行了研究。通过实验证明,两种水印方案的PSNR比较相似：迭加水印检测的相关值分布比较扩散,受高斯影响大;量化水印检测的相关值比较稳定,受高斯噪声的影响小。     

航天测控通信系统可靠性分析的Krylov子空间投影算法

基于Markov模型对航天测控通信系统进行可靠性分析的过程中,若系统中测控通信设备数量较多,模型中的状态空间随设备数量呈指数增长,将会导致数值计算困难.提出了一种基于Krylov子空间技术的可靠性分析方法,将大规模问题投影至小规模子空间中,求得问题的近似解.实验结果证明,Krylov子空间方法的计算速度及精度优于Ross方法和前向Euler法(forward Euler method,FEM).     

基于数据压缩的LSP参数高效量化算法

文中为解决超长帧编码系统中联合帧数过多导致LSP参数量化性能下降这个问题,将多项式拟合引入超长帧编码系统中,利用多项式拟合压缩LSP参数矩阵,以降低量化时实际联合的帧数。再用分裂矩阵量化器进行量化。仿真结果表明,在120 bps的参数量化速率下,此算法的量化性能优于矩阵量化算法(MQ),平均谱失真比MQ算法降低了0.0719 dB,平均分段信噪比提高了0.1971 dB。     

The effects of model parameter deviations on the variance of a linearly filtered time series

We consider a general linear filtering operation on an autoregressive moving average (ARMA) time series. The variance of the filter output, which is an important quantity in many applications, is not known with certainty because it depends on the true ARMA parameters. We derive an expression for the sensitivity (i.e., the partial derivative) of the output variance with respect to deviations in the model parameters. The results provide insight into the robustness of many common statistical methods that are based on linear filtering and also yield approximate confidence intervals for the output variance. We discuss applications to time series forecasting, statistical process control, and automatic feedback control of industrial processes. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Generating Pareto‐optimal boundary points in multiparty negotiations using constraint proposal method

In this paper a constraint proposal method is developed for computing Pareto‐optimal solutions in multiparty negotiations over continuous issues. Constraint proposal methods have been previously studied in a case where the decision set is unconstrained. Here we extend the method to situations with a constrained decision set. In the method the computation of the Pareto‐optimal solutions is decentralized so that the DMs do not have to know each others' value functions. During the procedure they have to indicate their optimal solutions on different sets of linear constraints. When the optimal solutions coincide, the common optimum is a candidate for a Pareto‐optimal point. The constraint proposal method can be used to generate either one Pareto‐optimal solution dominating the status quo solution or several Pareto‐optimal solutions. In latter case a distributive negotiation among the efficient points can be carried out afterwards. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 210–225, 2001